Series BUP Adsorption Dryers - Boge
- mdi can help!
- The mdi Sales Team is standing by to help you with your order or questions about our Products. Give mdi a Call Today!
- (727) 835 - 0648
- Email our Sales Team
- Office Hours: 7:30 am - 7:00 PM EST M - F
Heatless Adsorption Dryers
Flow Capacity: 3 - 60 cfm
Max. Operating Pressure: 250 psi
INLET AND OUTLET VALVES
The generously dimensioned inlet and outlet valves ensure a lower pressure differential across the dryer. Energy savings are therefore possible due to tighter operating pressure band.
REGENERATION
The twin tower system allows regeneration simultaneously with the adsorption eliminating the need for any external power supply. The wet tower is purged via a stream of dry air that is finally vented to atmosphere.
FILTRATION
The entire range is equipped with both pre and after filter as standard. Even before drying, all solids and aerosols up to 0.01 µm are removed from the compressed air supply – assuring best possible quality.
DEW POINT CONTROL
The entire series is available with dew point control that minimizes the regeneration air volume depending on temperature, pressure and output quantity thus reducing operating costs.
The easy way to dry compressed air:
The standard BOGE adsorption
dryers achieve a pressure dew point of -40°F. They can be configured
to reach -70°F. Such dewpoints eliminate the risk of downstream
condensate especially in the case of an external air line. Adsorption
dryers do not contain any CFCs and are therefore neither ozone
depleting nor do they have any impact on the environment.
| Model | Capacity | Regeneration Air (14.5 psi. +68°F) | Air Outlet (minimal) (14.5 psi. +68°F) | Pressure Loss New Condition | Dimensions H/W/D | Compressed Air Connection | Weight | |||
|---|---|---|---|---|---|---|---|---|---|---|
| m³/h | cfm | m³/h | cfm | m³/h | cfm | psi | in. | lbs. | ||
| BUP 0003 | 5 | 3 | 0.85 | 0.5 | 4.1 | 2.4 | 0.94 | 12 x 5 x 14 | ½" NPT | 15 |
| BUP 0005 | 10 | 5 | 1.70 | 1.0 | 8.1 | 4.8 | 1.37 | 12 x 5 x 23 | ½" NPT | 24 |
| BUP 0010 | 15 | 10 | 2.55 | 1.5 | 12.2 | 7.2 | 1.67 | 12 x 5 x 34 | ½" NPT | 33 |
| BUP 0015 | 25 | 15 | 4.25 | 2.5 | 20.3 | 11.9 | 3.63 | 12 x 5 x 55 | ½" NPT | 53 |
| BUP 0020 | 35 | 20 | 5.95 | 3.5 | 28.4 | 16.7 | 1.09 | 21 x 7 x 26 | 1" NPT | 64 |
| BUP 0030 | 50 | 30 | 8.50 | 5.0 | 40.6 | 23.9 | 1.45 | 21 x 7 x 36 | 1" NPT | 84 |
| BUP 0040 | 65 | 40 | 11.10 | 6.5 | 52.8 | 31.1 | 1.81 | 21 x 7 x 46 | 1" NPT | 106 |
| BUP 0050 | 80 | 50 | 13.60 | 8.0 | 65.0 | 38.2 | 2.47 | 21 x 7 x 56 | 1" NPT | 125 |
| BUP 0060 | 100 | 60 | 17.00 | 10.0 | 61.3 | 36.0 | 3.63 | 21 x 7 x 66 | 1" NPT | 147 |
Design: BUP 0003 - BUP 0060, Correction factor F
| Temperature | Operating pressure psi | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 58 | 73 | 87 | 102 | 116 | 131 | 145 | 160 | 174 | 189 | 203 | 218 | 232 | |
| 77°F | 0.69 | 0.82 | 0.96 | 1.10 | 1.24 | 1.38 | 1.50 | 1.50 | 1.50 | 1.50 | 1.50 | 1.50 | 1.50 |
| 86°F | 0.69 | 0.82 | 0.96 | 1.10 | 1.24 | 1.38 | 1.50 | 1.50 | 1.50 | 1.50 | 1.50 | 1.50 | 1.50 |
| 95°F | 0.63 | 0.75 | 0.88 | 1.00 | 1.13 | 1.26 | 1.38 | 1.50 | 1.50 | 1.50 | 1.50 | 1.50 | 1.50 |
| 104°F | 0.48 | 0.58 | 0.68 | 0.77 | 0.87 | 0.96 | 1.06 | 1.16 | 1.25 | 1.35 | 1.45 | 1.50 | 1.50 |
| 113°F | 0.38 | 0.45 | 0.53 | 0.60 | 0.68 | 0.75 | 0.83 | 0.90 | 0.98 | 1.05 | 1.13 | 1.20 | 1.28 |
| 122°F | 0.30 | 0.36 | 0.42 | 0.48 | 0.54 | 0.60 | 0.66 | 0.72 | 0.78 | 0.84 | 0.90 | 0.96 | 1.02 |
Example Compressed air to be dried
| Volume Flow | 350 scfm | |
|---|---|---|
| Min. operating pressure | 150 psig | |
| Max. inlet temperature | 100 ˚F | |
| Pressure dew point | 1.38 | |
