Series BHLD Adsorption Dryers - Boge


  • mdi can help!
  • The mdi Sales Team is standing by to help you with your order or questions about our Products. Give mdi a Call Today!
  • 727-835-0648
  • Email our Sales Team
  • Office Hours: 7:30 am - 5:30 pm EST M - F
  • Request a Quote




Adsorption Dryer Units

Heatless adsorption dryers with pre- and after- filters

Flow Capacity: 80 - 5000 cfm

Series BHLD Adsorption Dryers from Boge

MICROPROCESSOR CONTROL
The microprocessor control enables energy efficient control of the adsorption dryer. Optional dew point control reduces the regeneration air volume depending on temperature, pressure and output quantity.

FUNCTION DISPLAY
A functional display at the front of the control cabinet permanently indicates operational status. The ten-minute cycle can save up to six percent of energy. The compressor synchronizing control can also offer further energy savings potential.

FILTRATION
The entire range is equipped with both pre and after filter as standard. Even before drying, all solids and aerosols up to 0.01 ppm are removed from the compressed air supply – assuring best possible quality.

LOW RESIDUAL OIL CONTENT
The BHLD series can be equipped with an activated carbon adsorber to ensure a residual oil content of only 0.003 ppm – for the highest quality compressed air




Series BHLD Adsorption Dryers from Boge

The all-in one package for dry compressed air:
The ideal solution for compressed air pressure dew points below 38°F. The heatless BOGE adsorption dryers can reach dew points of -70°F (standard -40°F). The twin tower system allows regeneration simultaneously with the adsorption eliminating the need for any external power supply.

BOGE
Model
Capacity Dimensions H x W x D Compressed Air Connection Voltage standard Weight
m³/h cfm in. lbs.
BHLD - 80 136 80 77 x 30 x 24 3/4" FLG 110V/60HZ 384
BHLD - 100 170 100 77 x 30 x 24 1" FLG 110V/60HZ 550
BHLD - 150 255 150 85 x 34 x 24 1" FLG 110V/60HZ 600
BHLD - 200 340 200 86 x 34 x 24 1½" FLG 110V/60HZ 850
BHLD - 250 425 250 87 x 46 x 30 1½" FLG 110V/60HZ 975
BHLD - 300 510 300 87 x 46 x 30 1½" FLG 110V/60HZ 1050
BHLD - 350 595 350 89 x 46 x 30 2" FLG 110V/60HZ 1100
BHLD - 450 765 450 91 x 50 x 30 2" FLG 110V/60HZ 1200
BHLD - 500 850 500 91 x 50 x 30 2" FLG 110V/60HZ 1250
BHLD - 600 1019 600 91 x 50 x 30 2" FLG 110V/60HZ 2000
BHLD - 750 1274 750 93 x 66 x 40 3" FLG 110V/60HZ 2700
BHLD - 1000 1699 1000 98 x 70 x 40 3" FLG 110V/60HZ 3900
BHLD - 1250 2124 1250 98 x 70 x 40 3" FLG 110V/60HZ 4090
BHLD - 1500 2549 1500 109 x 93 x 50 4" FLG 110V/60HZ 5500
BHLD - 2000 3398 2000 109 x 93 x 50 4" FLG 110V/60HZ 6000
BHLD - 2500 4248 2500 115 x 112 x 60 4" FLG 110V/60HZ 6800
BHLD - 3000 5097 3000 120 x 120 x 70 6" FLG 110V/60HZ 9000
BHLD - 3500 5947 3500 125 x 120 x 70 6" FLG 110V/60HZ 9600
BHLD - 4000 6796 4000 128 x 120 x 75 6" FLG 110V/60HZ 10500
BHLD - 4500 7646 4500 130 x 130 x 80 6" FLG 110V/60HZ 11000
BHLD - 5000 8495 5000 135 x 130 x 80 6" FLG 110V/60HZ 12300
Dimensions of BHLD Adsorption Dryers







Example Compressed air to be dried to -40°
Given Flow 350 scfm
Min. operating pressure 120 psig
Max. inlet temperature 100 ˚F
Pressure dew point  -40 ˚F
Equation for Calculating which BHLD Model









Capacity correction factors for system air pressure (C1)
System Pressure(psig) 60 70 80 90 100 110 120 130 140 150
Correction Factor 0.65 0.73 0.82 0.91 1 1.09 1.18 1.27 1.35 1.44









Capacity correction factors for inlet air temperature (C2)
Inlet Temperature  (˚F) 70 80 90 100 105 110 115 120
Correction  Factor 1.2 1.15 1.1 1 0.9 0.8 0.7 0.6

*For inlet temperatures above 100°F, molecular sieve desiccant is required.

Manufacturers Distributor, Inc., Manufacturers Producers, Odessa, FL

Content © Copyright | Manufacturers Distributor, Inc. - mdi Sales
Site Use Acknowledges Acceptance of our Privacy Statement and our Terms of Service


This is a modal.

Reveal makes these very easy to summon and dismiss. The close button is simple an anchor with a unicode character icon and a class of close-reveal-modal. Clicking anywhere outside the modal will also dismiss it.

×